Unlock hundreds more features
Save your Quiz to the Dashboard
View and Export Results
Use AI to Create Quizzes and Analyse Results

OR
Sign inSign in with Facebook
Sign inSign in with Google
Quizzes > Quizzes for Business > Construction

Test Your Knowledge with Fire Safety Training Quiz

Boost Fire Safety Skills Through Interactive Questions

Difficulty: Moderate
Questions: 20
Learning OutcomesStudy Material
Colorful paper art depicting elements of a Fire Safety Training Quiz

Ready to elevate your fire safety knowledge? This fire safety training quiz offers an engaging fire prevention and emergency response assessment to test crucial skills. Ideal for students, workplace supervisors, and safety instructors seeking a comprehensive training quiz, it covers hazards, extinguisher use, and evacuation protocols. Easily customise in the quizzes editor, or explore related programs like our Workplace Safety Training Quiz and Employee Safety Training Assessment for wider safety practice.

Which of the following is a common fire hazard in an office environment?
Frayed electrical cords
Ergonomic chairs
Indoor plants
Automated lighting
Frayed electrical cords can spark and ignite nearby combustibles, making them a frequent source of office fires. Other items listed are not fire hazards in this context.
What does the first 'P' in the PASS technique for fire extinguisher use stand for?
Point at the fire
Pull the pin
Press the lever
Pump the handle
PASS stands for Pull the pin, Aim at the base of the fire, Squeeze the lever, and Sweep side to side. The first step is always to pull the pin to unlock the extinguisher.
When a fire alarm sounds in a building, what is the first action you should take?
Evacuate the building immediately
Silence the alarm
Call the fire department
Continue working until you see smoke
Upon hearing a fire alarm, the priority is to evacuate safely to avoid harm. Calling emergency services is important but secondary to personal safety and evacuation.
Which device is specifically designed to detect smoke particles and alert building occupants?
Motion sensor
Heat sensor
Smoke detector
Carbon monoxide detector
Smoke detectors use photoelectric or ionization technology to sense smoke particles. Heat sensors respond to temperature changes and carbon monoxide detectors to CO gas.
To prevent fire hazards in corridors and exits you should always:
Use damaged electrical appliances
Block escape routes during busy hours
Store flammable liquids near heat sources
Keep exits and corridors clear
Clear exits and corridors ensure unobstructed egress during emergencies. Storing flammables near heat sources or blocking routes increases fire risk and impedes evacuation.
Which class of fire involves flammable liquids such as gasoline or oil?
Class D
Class C
Class B
Class A
Class B fires involve flammable liquids and gases. Class A fires involve ordinary combustibles, Class C electrical equipment, and Class D combustible metals.
What is the correct sequence in the PASS technique for using a fire extinguisher?
Pull, Aim, Squeeze, Sweep
Aim, Pull, Sweep, Squeeze
Pull, Squeeze, Aim, Sweep
Squeeze, Pull, Aim, Sweep
PASS stands for Pull the pin, Aim at the base of the fire, Squeeze the handle, and Sweep the nozzle from side to side. This sequence ensures effective extinguishing.
In an evacuation plan, the designated assembly area should be located:
Next to the main entrance
Inside the building
On a roadway
A safe distance from the building
Assembly areas must be a safe distance away to avoid falling debris and allow emergency responders clear access. Inside or near roadways poses direct hazards.
Which practice best helps identify potential fire hazards in a commercial kitchen?
Conducting regular hazard inspections
Rearranging furniture daily
Scheduling more deliveries
Deep cleaning every month
Regular hazard inspections systematically uncover risks like grease buildup or damaged wiring. Cleaning and rearranging help but do not replace formal inspections.
A fire prevention strategy that specifically controls welding and cutting operations is called:
Hot work permit system
Confined space entry program
Lockout-tagout program
Grounding and bonding system
A hot work permit system ensures welding or cutting is authorized, monitored, and safe precautions are in place. Other programs address different hazards.
What is the primary role of a fire alarm control panel in a building?
Vent smoke from the building
Monitor detectors and initiate alarms
Automatically suppress fires
Provide emergency lighting
The fire alarm control panel receives signals from detectors and triggers audible/visual alarms. It does not suppress fires or manage ventilation systems.
During an emergency, which method is most effective for immediate internal building communication?
Face-to-face communication
Individual text messages
Portable two-way radios
Pre-established alarm signals and public address announcements
Pre-established alarm tones and PA systems reach all occupants immediately. Texts or radios may be delayed or inaccessible during an emergency.
Which factor increases the risk of fire spread in a storage room?
Providing proper ventilation
Excessive stacking of combustible materials
Installing a sprinkler system
Using metal shelving
Overstacked combustibles can fuel a fire and block sprinklers or exits. Metal shelving and sprinklers help with fire control, while ventilation mitigates smoke.
When analyzing risk factors in a laboratory, which aspect should be evaluated first?
Staff parking locations
Chemical storage compatibility
Room color scheme
Furniture style
Storing chemicals by compatibility prevents reactions that can lead to fires or explosions. Other aspects are unrelated to fire risk.
A properly functioning fire door must:
Remain open during normal operations
Be wedged open at all times
Close automatically in case of fire
Lock from the inside
Fire doors are designed to close automatically on activation to contain fire and smoke. Wedging or locking them open defeats their protective function.
Which type of suppression system is best suited for an electrical equipment fire in a server room?
Clean agent gas system
Water sprinkler system
Foam sprinkler system
Dry chemical powder system
Clean agent gas systems extinguish fires without damaging electronics or leaving residue. Water and foam can harm sensitive equipment, and dry chemical can cause corrosion.
When assessing risk factors for storing flammable liquids, which two properties are most critical?
Flash point and container integrity
Evaporation rate and pH level
Liquid color and odor
Supplier name and delivery schedule
Flash point indicates fire risk, and container integrity prevents leaks. Other properties are less directly related to fire hazards.
In a multi-zone fire alarm system, a continuous bell tone followed by a zone-specific voice message indicates:
End-of-line resistor test completion
Supervisory signal with maintenance instructions
General alarm activation followed by identification of the affected zone
Detector fault in all zones
A continuous bell signals a general alarm, and the subsequent voice message pinpoints the fire zone for targeted evacuation or response.
Developing a fire safety plan for a high-rise building should include:
Use of only one emergency exit
Removal of all interior fire doors
Stairwell pressurization and refuge area designation
Disabling elevators for the duration of occupancy
Pressurizing stairwells prevents smoke infiltration and refuge areas offer safe waiting zones. Disabling safety features or reducing exits increases risk.
When evaluating the effectiveness of a fire prevention program, which metric provides the best insight?
Employee survey satisfaction scores
Reduction in actual fire incidents and near misses
Number of drills conducted each year
Total cost of fire safety equipment purchased
A decrease in real incidents and near misses directly reflects program success in preventing fires. Drill counts or costs alone do not measure real-world impact.
0
{"name":"Which of the following is a common fire hazard in an office environment?", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Which of the following is a common fire hazard in an office environment?, What does the first 'P' in the PASS technique for fire extinguisher use stand for?, When a fire alarm sounds in a building, what is the first action you should take?","img":"https://www.quiz-maker.com/3012/images/ogquiz.png"}

Learning Outcomes

  1. Identify common fire hazards in diverse environments
  2. Demonstrate proper fire extinguisher operation techniques
  3. Apply evacuation procedures effectively during emergencies
  4. Evaluate fire prevention strategies and best practices
  5. Analyse risk factors to enhance safety planning
  6. Master alarm system use and emergency communication

Cheat Sheet

  1. Spot Common Fire Hazards - Become a hazard detective and scan your surroundings for overloaded outlets, loose wiring, or piles of flammable materials. Early identification of risks like blocked exits or messy storage can stop a fire before it starts. HSE Study Guide
  2. Master the P.A.S.S. Technique - Remember Pull the pin, Aim low, Squeeze the handle, and Sweep side to side to tackle small fires safely. Practicing P.A.S.S. regularly builds muscle memory so you act fast when every second counts. OSHA Portable Extinguishers
  3. Identify Extinguisher Types - Not all fires are the same: water, foam, CO₂, and dry powder extinguishers each have special talents. Pick the right one for wood, liquid, or electrical fires to avoid making things worse. Fire Emergency Tips
  4. Practice Evacuation Drills - Map out primary and secondary escape routes, choose a safe meeting spot, and time your drills. Turning evacuation plans into a fun role-play exercise helps everyone stay calm under pressure. HSE Study Guide
  5. Adopt Fire Prevention Habits - Keep hallways free of clutter, store chemicals in proper containers, and schedule routine equipment inspections. Small daily actions - like unplugging unused devices - add up to major risk reduction. HSE Study Guide
  6. Conduct Fire Risk Assessments - Regularly tour your space with a critical eye: note fraying cords, malfunctioning alarms, or heat sources near combustibles. Document your findings and make quick fixes to reinforce safety. HSE Study Guide
  7. Ensure Alarm System Reliability - Test smoke detectors and alarms monthly, replace dead batteries, and confirm backup power operation. A well-maintained system gives you precious extra moments to escape or extinguish a small fire. HSE Study Guide
  8. Create Emergency Communication Plans - Assign clear roles - who calls 911, who guides teammates, who grabs the first-aid kit - and run through hypothetical scenarios. Fast, coordinated messaging can mean the difference between chaos and control. HSE Study Guide
  9. Keep Extinguishers in Top Shape - Check pressure gauges, clear away dust, and verify accessibility so your extinguisher is always ready. A neglected unit is like an uncharged battery: useless when you need it most. SafeWise
  10. Join Ongoing Safety Training - Firefighting techniques and regulations evolve, so refresh your skills with courses and hands-on workshops. The more you learn, the more confident and prepared you'll be in an emergency. HSE Study Guide
Make a Quiz (FREE) Copy & Edit This Quiz Create a Quiz with AI

Construction Quizzes

Powered by: Quiz Maker